Open Access

Comparing ambient, air-convection, and fluid-convection heating techniques in treating hypothermic burn patients, a clinical RCT

  • Britt-Marie Kjellman1,
  • Mats Fredrikson2,
  • Gunilla Glad-Mattsson2,
  • Folke Sjöberg1, 2 and
  • Fredrik RM Huss1, 2, 3Email author
Annals of Surgical Innovation and Research20115:4

https://doi.org/10.1186/1750-1164-5-4

Received: 13 April 2011

Accepted: 7 July 2011

Published: 7 July 2011

Abstract

Background

Hypothermia in burns is common and increases morbidity and mortality. Several methods are available to reach and maintain normal core body temperature, but have not yet been evaluated in critical care for burned patients. Our unit's ordinary technique for controlling body temperature (Bair Hugger®+ radiator ceiling + bed warmer + Hotline®) has many drawbacks e.g.; slow and the working environment is hampered.

The aim of this study was to compare our ordinary heating technique with newly-developed methods: the Allon™2001 Thermowrap (a temperature regulating water-mattress), and Warmcloud (a temperature regulating air-mattress).

Methods

Ten consecutive burned patients (> 20% total burned surface area and a core temperature < 36.0°C) were included in this prospective, randomised, comparative study. Patients were randomly exposed to 3 heating methods. Each treatment/measuring-cycle lasted for 6 hours. Each heating method was assessed for 2 hours according to a randomised timetable. Core temperature was measured using an indwelling (bladder) thermistor. Paired t-tests were used to assess the significance of differences between the treatments within the patients. ANOVA was used to assess the differences in temperature from the first to the last measurement among all treatments. Three-way ANOVA with the Tukey HSD post hoc test and a repeated measures ANOVA was used in the same manner, but included information about patients and treatment/measuring-cycles to control for potential confounding. Data are presented as mean (SD) and (range). Probabilities of less than 0.05 were accepted as significant.

Results

The mean increase, 1.4 (SD 0.6°C; range 0.6-2.6°C) in core temperature/treatment/measuring-cycle highly significantly favoured the Allon™2001 Thermowrap in contrast to the conventional method 0.2 (0.6)°C (range -1.2 to 1.5°C) and the Warmcloud 0.3 (0.4)°C (range -0.4 to 0.9°C). The procedures for using the Allon™2001 Thermowrap were experienced to be more comfortable and straightforward than the conventional method or the Warmcloud.

Conclusions

The Allon™2001 Thermowrap was more effective than the Warmcloud or the conventional method in controlling patients' temperatures.

Background

Transient hypothermia (i.e. low body core temperature) is common in burns. All patients risk a decrease in body temperature between the scene of trauma and admission to the burn unit. At the burn unit repeated procedures under anaesthesia mean that the risk of hypothermia is not reduced for a long part of the patient's stay. Despite this risk, little progress has been made to resolve the issue.

In our burn unit the typical approach to combat hypothermia would be increased ambient room temperature, resuscitation with warm fluids, warm blankets, radiators in the ceilings, and hot air. These techniques are often easily available and technically less demanding but often not effective enough and slow working as well as influencing the staff's work environment.

For hypothermic trauma patients a number of rewarming modalities have been described and can be divided in three main strategies; passive rewarming (optimizing the environment thus allowing endogenous heat production), active external rewarming (adding heat to body surfaces), and active core rewarming (adding heat to internal body surfaces) [1].

Even though passive rewarming could be considered the basic first step in rewarming a cold patient it alone is seldom efficient enough in burn care and should be combined with other modalities. Active external rewarming by e.g. convective air blankets is routinely used in burn care. However, peripherally vasoconstricted patients are often less susceptible to active external rewarming and can also sustain thermal injuries by intense local heat build-up, especially in already traumatized (burned) skin. Probably the most frequently, and easiest, used active core rewarming technique in burn care is intravenous infusion of warm fluids. There are, though, more elaborate examples such as e.g. body-cavity lavage and airway rewarming available.

Any of the three rewarming strategies may be appropriate in certain settings and in situations where resource availability varies.

However, hypothermia during admission and procedures are still reported [27], even though numerous (new) rewarming approaches, including invasive techniques, have been described [5, 813].

Invasive techniques using e.g. intravascular thermal regulation catheters have been proposed to be effective and reliable [13]. However, invasive techniques are not commonly available and certainly more technical challenging at least regarding burn patients. Catheters need to be introduced centrally in highly bacterial susceptible patients and its safety and efficacy is still to be investigated in burn patients.

Hypothermia is associated with several deleterious effects and increased morbidity and mortality. Complications such as myocardial ischaemia, arrhythmias, vasoconstriction, and coagulopathies are associated with hypothermia, as is impairment of wound healing, and abnormalities of the immune-, stress-, and neurological systems [8, 1418].

The patient's core temperature is defined as the temperature in the central circulation, and is regulated by the hypothalamus. The core temperature in a healthy human being is fairly constant (36.5-37.5°C) despite fluctuating ambient temperatures, and this allows the biochemical processes to function unaffected by the outer conditions [5, 15]. However, patients being anaesthetised in general, and injured patients in particular, face an inherent risk of hypothermia during procedures [5, 8, 11, 19, 20]. Hypothermia is technically recognised as a core temperature of less than 36.5°C, but a usual threshold for healthy subjects is < 35.0°C [8, 15].

Hypothermia is further commonly divided into three groups depending on the core temperature (ranges for injured patients in brackets) [8]: mild 35-32°C (36-34°C); moderate 32-30°C (34-32°C); and severe < 30°C (< 32°C).

To prevent and combat hypothermia in burned patients in our unit we use Bair Hugger™, radiator ceilings, bed warmers (warm air), and Hotline® or Fluido®- infusion heaters. However, we still encounter hypothermia occasionally in patients, both during and after procedures. Because of the warming technique used, the ambient room temperature is often negatively affecting the staff while working close to patients for long periods of time. We have also noticed that even though warm air is circulating around the patient from the bed warmers, patients with leaking wounds (and thus wet bandages) become even more hypothermic, probably as a result of strong convection effects cooling the patient.

This spurred us to investigate other ways of preventing and combating hypothermia in burn patients, while keeping the staff's working environment tolerable.

Many methods of heating have been reported in the quest for the optimal and most efficient technique [9, 16, 2124], and two relatively new techniques appealed to us: the Allon™2001 Thermowrap (a temperature-regulating water mattress-fluid-convection), and Warmcloud (a temperature-regulating air mattress-air-convection).

The fluid-convection technique has been studied during thoracic and abdominal surgery and has been reported to increase (and maintain) body temperature more efficiently than traditional methods [12, 22, 23, 25, 26]. Extended details about the Allon™ 2001 Thermowrap are given by Nesher et al. 2001 [12]. There are fewer scientific reports about the KanMed Warmcloud [21, 24].

We could find no reports of the use of either the fluid- or air-convection techniques for patients with burns, and so have investigated them in burned patients, and compared them with our ordinary heating technique.

The aim of this study was to investigate whether either the fluid-convection or the air-convection technique could prove to be more efficient in preventing and combating hypothermia in burn patients as compared to our conventional method.

Patients and methods

The study was approved by the local ethics committee (Dnr 03-303) in accordance with the ethical principles that originated in the Declaration of Helsinki.

Inclusion criteria were patients with burns (> 20%TBSA-total body surface area), a core temperature of < 36.0°C, and oral and written informed consent. Consecutive patients with these criteria fulfilled were considered for inclusion on admission, or after procedures.

Patients were randomised to be treated with 'Allon'-Allon™2001 Thermowrap+ Hotline® ((Allon Thermowarp™, MTRE, Israel), (Hotline® Blood and Fluid Warmer, Smiths Medical Sverige AB, Sollentuna, Sweden)), or 'Warmcloud'-Warm cloud + Hotline® (KanMed Warmcloud, KanMed AB, Bromma, Sweden), or 'Conventional'-Bair Hugger®+ radiator ceiling + bed warmer + Hotline® (Bair Hugger®, Medicvent AB, Umeå, Sweden).

All medical equipment including the Allon™2001 Thermowrap and KanMed Warmcloud was used according to the manufacturers' instructions.

Procedure

The protocol was designed so that all patients were to be exposed to all 3 methods in a random fashion (according to a pre-study randomization scheme each patient could start with any one method and the other two followed randomly). Each treatment/measuring-cycle lasted for 6 hours, and should contain all three methods assessed for two hours each. Core temperature was measured every 15 minutes using an indwelling (bladder) thermistor.

To illustrate: a patient starts the study by being randomized to be rewarmed with the three techniques in the order of Conventional-Allon-Warmcloud. Thus the patient is subjected to firstly 2 hours of Bair Hugger®+ radiator ceiling + bed warmer + Hotline® (Conventional heating), thereafter the Bair Hugger® is removed, radiator ceiling and bed warmer turned off and the patient is put on the Allon™2001 Thermowrap mattress + Hotline® for two hours (Allon heating), whereafter the Allon™2001 Thermowrap mattress is removed and the patient is put on the KanMed Warmcloud mattress + Hotline® (Warmcloud heating) for two hours. Thus a 6-hour treatment/measuring-cycle is done with 2 hours assessment of each heating technique measuring core temperature every 15 minutes.

The planned 6-hour treatment/measuring-cycle was completed even if the patient reached a core temperature of > 36.0°C during the cycle. If a patient did not reach a core temperature of > 36.0°C within the 6-hour period, the same patient was included again, this time with a new randomisation protocol, and a subsequent 6-hour treatment/measuring-cycle.

Statistical analysis

Paired t-tests were used to assess the significance of differences between the treatments within the patients. One-way analysis of variance (ANOVA) was used to assess the differences in temperature from the first to the last measurement among all treatments. Three-way ANOVA with the Tukey HSD post hoc test was used in the same manner, but included information about patients and treatment/measuring-cycles to control for potential confounding from ordering and also because not all patients received all treatments. A repeated measures ANOVA with information about all times and controlling for treatment, patients, and measuring-cycles for the same reason as above. Data are presented as mean (SD) and (range) if not otherwise stated. Probabilities of less than 0.05 were accepted as significant. The paired t-tests and one-way ANOVA were done with the help of StatView for Windows (version 5.0, SAS Institute Inc., Cary, NC, USA) and the three-way and repeated measures ANOVA were done using the Statistical Package for the Social Sciences (SPSS, version 17, SPSS Inc, Chicago, Ill, USA).

Results

General

A total of 10 patients that fulfilled the inclusion criteria of > 20% TBSA and a core temperature < 36.0°C were included in the study. The 10 patients (9 men, 1 woman) had a mean age of 48 years, mean body weight of 77 kg, and a mean total body surface area burned of 47%. The demographic data is shown in Table 1.
Table 1

Demography

Case No

Age (year)

Weight (kg)

TBSA-burn (%)

Full-thickness burn (%)

Deep dermal burn (%)

Superficial dermal burn (%)

No of treatment/measuring-cycles

1

32.0

80.0

87.0

45.0

42.0

0

1

2

58.0

76.3

56.0

41.5

4.5

0

4

3

26.0

72.0

59.0

39.0

17.0

3.0

2

4

42.0

90.0

21.5

2.0

15.5

4.0

2

5

41.0

87.0

20.0

0

3.5

16.5

1

6

78.0

78.4

20.5

2.0

18.5

0

1

7

78.0

70.0

32.5

20.5

11.0

1.0

1

8

20.0

66.0

56.0

27.5

28.5

0

2

9

66.0

74.1

27.0

24.5

1.5

1.0

3

10

36.0

80.0

86.0

79.5

6.5

0

1

Demography of patients including extent of burn and number of treatment/measuring-cycles. All where men except case 9.

The included patients gave rise to 18 treatment/measuring-cycles together with 21 'Allon', 23 'conventional', and 10 'Warmcloud' 2-hours periods. Of the 18 treatment/measuring-cycles 8 were completed with only the 'conventional' and 'Allon' methods however still in a randomized fashion. In these cases the 3 × 2-hour period with 15 minute intervals was followed, but the patient was exposed to only the two methods of heating. This was considered in the management of statistical data.

Results of temperature changes

Individual results are shown Table 2 and the complete data-set is found in Table 3: Appendix. 'Allon' increased the temperature in all 21 cycles and gave a mean change in temperature of 1.4 (0.6)°C (range 0.6-2.6) whereas 'conventional' showed a mean change in temperature of 0.2 (0.6)°C (range -1.2 to 1.5). 'Warmcloud' showed a mean temperature increase of 0.3 (0.4)°C (range -0.4 to 0.9) (Figure 1). The 2 hour-cycles of the 'conventional' heating technique either increased the patients' body temperature in 12/23 cycles, did not affect the temperature at all (1 cycle), or decreased the temperature in 10/23 cycles. Of the total 10 cycles the 'Warmcloud' increased the patients' body temperature in 8 (Table 2) and decreased the temperature in 2. There was significant differences (p < 0.0001) in temperature change in favour of 'Allon'. When split into first, second, and third 2-hour periods of the 6-hour treatment/measuring-cycle there were larger increases in core temperature with the 'Allon' than with the other two techniques for each period (p < 0.01, p < 0.05, and p < 0.05, respectively) (Figure 2).
Table 2

Change in core temperature per treatment/measuring-cycle

  

Change in temperature from baseline (°C) during treatment/measuring-cycle of 2 hours

Treatment/measuring-cycle

Case number

'Allon'

'conventional'

'Warmcloud'

1

1

1.3

0.5

0.5

2

2

1.2

0.4

0.4

3

2

1.8

0.2

0.4

4

2

1.1

-0.1

0.1

5

2

0.6

-0.3

0.9

6

3

1.8

-0.2

-0.4

7

3

1.8

-0.2/-0.4

 

8

4

2.1

0.4/-0.2

 

9

4

2.5

0.2/-0.1

 

10

5

2.2

0/-0.5

 

11

6

1.0/0.6

0.4

 

12

7

1.7

0.6/-0.6

 

13

8

1.4/0.9

1.0

 

14

9

2.0

1.5

-0.4

15

8

0.9

-0.1

0.3

16

9

0.7

0.7

0.8

17

9

0.8

0.1

0.6

18

10

1.1/2.6

1.3

 

Mean (SD) temperature change (°C)

  

1.43 (0.62)°C

0.16 (0.62)°C

0.32 (0.44)°C

Change in core temperature during each 2-hour cycle per treatment/measuring-cycle and technique. Note that in 10 treatment/measuring-cycles all 3 methods were completed and in 8 treatment/measuring-cycles just the 'conventional' and the 'Allon' methods were completed, however all 18 treatment/measuring-cycles were performed in a randomized fashion.

Table 3

Appendix

 

Cycle 1

Cycle 2

Cycle 3

Cycle 4

Cycle 5

Cycle 6

Cycle 7

Cycle 8

Cycle 9

 

Pt 1

Pt 2

Pt 2

Pt 2

Pt 2

Pt 3

Pt 3

Pt 4

Pt 4

Time

°C

Mod

°C

Mod

°C

Mod

°C

Mod

°C

Mod

°C

Mod

°C

Mod

°C

Mod

°C

Mod

0'

34,3

 

35,9

 

34,2

 

35,8

 

35,8

 

34,8

 

34,7

 

34,6

 

34,2

 

15'

34,3

A

36

W

34,2

A

35,8

W

35,8

C

34,8

A

34,6

C

34,7

C

34,2

C

30'

34,6

A

35,9

W

34,5

A

35,8

W

35,6

C

34,9

A

34,7

C

34,8

C

34,2

C

45'

34,7

A

35,9

W

34,8

A

35,7

W

35,5

C

35,2

A

34,7

C

34,8

C

34,3

C

60'

34,6

A

36

W

35,2

A

35,7

W

35,4

C

35,4

A

34,7

C

35

C

34,3

C

75'

34,8

A

36,1

W

35,5

A

35,7

W

35,4

C

35,6

A

34,6

C

34,9

C

34,3

C

90'

35,3

A

36,2

W

35,7

A

35,7

W

35,4

C

36

A

34,7

C

34,9

C

34,4

C

105'

35,5

A

36,3

W

35,9

A

35,8

W

35,3

C

36,2

A

34,7

C

35

C

34,4

C

120'

35,6

A

36,3

W

36

A

35,9

W

35,5

C

36,6

A

34,5

C

35

C

34,4

C

135'

35,6

C

36,4

C

36,1

C

35,9

A

35,3

A

37

C

34

A

35,2

A

34,6

A

150'

36

C

36,5

C

36,1

C

36

A

35,3

A

36,8

C

34,1

A

35,5

A

34,9

A

165'

36

C

36,6

C

36

C

36,2

A

35,5

A

36,6

C

34,3

A

35,8

A

35,1

A

180'

36

C

36,6

C

36

C

36,5

A

35,5

A

36,9

C

34,6

A

36,1

A

35,5

A

195'

35,9

C

36,6

C

36,1

C

36,7

A

35,6

A

36,3

C

35

A

36,4

A

36

A

210'

36

C

36,6

C

36

C

36,7

A

35,7

A

36,7

C

35,3

A

36,6

A

36,3

A

225'

36

C

36,7

C

36,1

C

36,7

A

35,9

A

36,5

C

36

A

37

A

36,5

A

240'

36,1

C

36,7

C

36,2

C

37

A

36,1

A

36,4

C

36,3

A

37,1

A

36,9

A

255'

36,2

W

36,8

A

36,3

W

36,9

C

36,4

W

36,4

W

36,4

C

37

C

37,1

C

270'

36,3

W

36,9

A

36,3

W

37

C

36,6

W

36,3

W

36,3

C

36,8

C

37,1

C

285'

36,3

W

37

A

36,5

W

37

C

36,7

W

36,2

W

36,2

C

36,6

C

37,1

C

300'

36,4

W

37,2

A

36,6

W

37

C

36,8

W

36,1

W

36,1

C

36,3

C

36,9

C

315'

36,5

W

37,4

A

36,6

W

37

C

36,8

W

36

W

36

C

36,2

C

36,8

C

330'

36,5

W

37,4

A

36,6

W

36,9

C

36,9

W

35,8

W

35,9

C

36,1

C

36,8

C

345'

36,6

W

37,5

A

36,6

W

36,9

C

37

W

36

W

35,9

C

35,9

C

36,8

C

360'

36,6

W

37,9

A

36,6

W

36,9

C

37

W

36

W

35,9

C

35,9

C

36,8

C

 

Cycle 10

Cycle 11

Cycle 12

Cycle 13

Cycle 14

Cycle 15

Cycle 16

Cycle 17

Cycle 18

 

Pt 5

Pt 6

Pt 7

Pt 8

Pt 9

Pt 8

Pt 9

Pt 9

Pt 10

Time

°C

Mod

°C

Mod

°C

Mod

°C

Mod

°C

Mod

°C

Mod

°C

Mod

°C

Mod

°C

Mod

0'

35

 

35,3

 

34,8

 

33,4

 

35,5

 

35,9

 

35,1

 

35,2

 

32,9

 

15'

34,8

C

35,4

A

34,8

C

33,1

A

35,4

W

35,9

C

35,1

C

35,1

W

32,9

A

30'

34,8

C

35,5

A

34,7

C

33,1

A

35,3

W

35,8

C

35,3

C

35,1

W

32,8

A

45'

34,8

C

35,4

A

34,8

C

33,2

A

35,2

W

35,8

C

35,4

C

35,1

W

33

A

60'

34,8

C

35,7

A

34,9

C

33,5

A

35,3

W

35,7

C

35,6

C

35,2

W

33,2

A

75'

34,9

C

35,6

A

35

C

33,8

A

35,2

W

35,7

C

35,7

C

35,6

W

33,4

A

90'

34,9

C

35,7

A

35,2

C

34,2

A

35,2

W

35,8

C

35,7

C

35,6

W

33,6

A

105'

35

C

36,2

A

35,4

C

34,5

A

35,1

W

35,8

C

35,8

C

35,7

W

33,6

A

120'

35

C

36,3

A

35,4

C

34,8

A

35,1

W

35,8

C

35,8

C

35,8

W

34

A

135'

35,3

A

36,6

C

35,7

A

35,5

C

35,1

A

36

A

36

W

35,8

A

34,3

C

150'

35,3

A

36,7

C

36

A

35,6

C

35,3

A

36

A

36,1

W

35,9

A

34,5

C

165'

35,3

A

36,7

C

36,1

A

35,7

C

35,4

A

36,4

A

36,2

W

36

A

34,8

C

180'

35,8

A

36,6

C

36,3

A

35,7

C

35,9

A

36,5

A

36,2

W

36,1

A

34,7

C

195'

36

A

36,7

C

36,6

A

35,7

C

36,4

A

36,7

A

36,3

W

36,3

A

34,7

C

210'

36,7

A

36,6

C

36,7

A

35,8

C

36,7

A

37

A

36,4

W

36,4

A

34,7

C

225'

37

A

36,6

C

37

A

35,7

C

36,8

A

36,9

A

36,5

W

36,5

A

34,8

C

240'

37,2

A

36,7

C

37,1

A

35,8

C

37,1

A

36,7

A

36,6

W

36,6

A

35,3

C

255'

37,4

C

36,9

A

37,2

C

35,8

A

37,4

C

36,9

W

36,7

A

36,4

C

35,3

A

270'

37,1

C

37

A

37,2

C

36

A

37,4

C

36,9

W

36,7

A

36,4

C

35,3

A

285'

37

C

37,3

A

37

C

36

A

37,5

C

36,8

W

36,8

A

36,3

C

35,5

A

300'

36,9

C

37,4

A

37

C

36,1

A

37,9

C

36,9

W

36,9

A

36,4

C

35,8

A

315'

36,8

C

37,4

A

36,6

C

36,4

A

38,1

C

36,7

W

37

A

36,5

C

36,1

A

330'

36,8

C

37,4

A

36,6

C

36,4

A

38,2

C

36,8

W

37,1

A

36,6

C

37,8

A

345'

36,7

C

37,4

A

36,5

C

36,7

A

38,4

C

36,7

W

37,3

A

36,6

C

37,8

A

360'

36,7

C

37,3

A

36,5

C

36,7

A

38,6

C

37

W

37,3

A

36,7

C

37,9

A

The complete data-set of all treatment/measuring-cycles.

Pt-Patient, Mod-Modality, A-Allon (fluid-convection), W-WarmCloud (air-convection), C-Conventional

Figure 1

Mean change in core temperature. Box plot indicating the mean change in core temperature of the three methods of heating.

Figure 2

Temperature changes split by 1 st , 2 nd , and 3 rd 2-hour periods. Box plot of temperature changes for the three methods of heating split by first, second, and third 2-hour periods during the 6-hour treatment/measuring-cycle.

There was a significant difference between the methods of heating (p < 0.001) with a significant advantage for 'Allon' compared with both 'conventional' and 'Warmcloud' techniques (p < 0.001 in both cases). There was a significant interaction between the 'Allon' technique and time (Figure 3).
Figure 3

Difference in temperature over time. Difference in temperature over time adjusted for patient and treatment/measuring-cycle. Indicating specifically a significant interaction between heating technique 'Allon' and time. The lower starting temperature (statistically not significant) for 'Allon' was pure accidental as treating orders were randomized.

Discussion

Transient hypothermia in burned patients is common. Because the burn itself includes damaged and severely disturbed thermoregulation and fluid regulation, burned patients are at risk of developing hypothermia, which is associated with increased mortality and morbidity. Several ways of reaching and maintaining a normal core temperature are available.

Burned patients also often become hypothermic during prehospital treatment and procedures, and it is difficult to rewarm patients, in part because their large open wounds leak fluid that increases heat loss by evaporation; leaking wounds also lead to wet bandages and so convective loss increases.

To be able to maintain a patient normothermic during resuscitation and treatment is important to avoid complications and for an adequate wound healing. A randomised controlled trial by Melling et al. showed that preoperative warming of patients significantly reduced the number of post operative infections [16].

The basic principle of increasing the ambient temperature is seldom sufficient, and the staff's work environment is also affected.

The fluid convection technique increased core temperature in all patients during all treatment/measuring-cycles, whereas the conventional method and the air-convection technique quite often either reduced the core temperature of the patients or increased it by only a small amount. The fluid convection technique was the only method that showed a significant correlation with time, that is, the longer the patient was left on the temperature regulating water-mattress, the more the core temperature increased (Figure 3).

The fact that 8 treatment/measuring-cycles consisted of just the conventional and the air-convection techniques has been considered in our analysis. However, even though the number of patients and treatment/measuring-cycles included is fairly small, a significant difference in increase in core temperature was shown among the different methods of heating in favour of the fluid-convection technique. This was true regardless of the order in which the patients were treated by each method (Figures 1 and 2). Still, a two-way experiment (with reverse-crossover) to confirm these findings would certainly be of considerable value. Nevertheless, these findings make us think that the results are relevant and may be generalizable to a larger group of patients and settings.

The superiority of the fluid-convection technique in increasing and maintaining body temperature better than the other heating techniques examined, based on intravenous fluid warmer and forced-air warmer in open heart and abdominal surgery (previously shown by Nesher et al. and Janicki et al.) [12, 22] further strengthens our assumption that our findings are also generalizable to the burned patients.

Even though not studied in this paper, others have shown that the haemodynamic state of the patients is also improved when they are treated with fluid-convection technique as indicated by a higher cardiac index and lower systemic vascular resistance [12, 22]. This is also of considerable value for burned patients but needs to be further studied.

The work environment also improved because the bulky and noisy bed-warmers (fans) could be omitted and the ambient temperature was improved (reduced to levels more comfortable to the staff) because the ceiling radiators could be turned off without the patients' core temperatures being reduced while warmed by the fluid-convection technique.

It is important to stress that the evaluation of the three warming techniques was done on patients that for some reason had developed mild hypothermia and the methods were evaluated on the point of ability to normalize the temperature in a short time perspective, i.e. 2 hours. An evaluation was not performed on the ability of the techniques to maintain normothermia. The latter effect may be less demanding for any technique.

It needs also to be pointed out that the conventional temperature controlling technique presented in this investigation has been developed and used for many years prior to this study and the burn treatment most commonly offered during the development of the technique has been the open exposure technique for burn care. This procedure is not used today and this is also an argument supporting the use of the fluid-convection technique. However, the changing and using another temperature regulating procedure also calls for an evaluation of how the temperature control systems may affect the whole burn care program and in the final end the wound healing process. The latter has not been evaluated in this study and needs also to be considered in the overall conclusions of the temperature regulating procedure used.

Nevertheless, it is obvious that the many adverse consequences of hypothermia in burn patients suggest that everything that can be done to prevent, or combat, low core temperature is important as to avoid increased morbidity and mortality.

Conclusions

The fluid-convection technique (represented by the Allon™2001 Thermowrap) was more effective than both our conventional method and the air-convection technique (represented by the KanMed Warmcloud mattress) for the normalisation of accidental mild hypothermia in patients with significant burns. This technique also lead to an experienced improved work environment for the burn unit staff.

Declarations

Acknowledgements and Funding

This study was supported by the County of Östergötland and Hälsofonden.

The funding bodies had no role in study design; in the collection, analysis, or interpretation of data; in the writing of the manuscript; or in the decision to submit the manuscript for publication.

Authors’ Affiliations

(1)
The Burn unit, Dept. of Plastic Surgery, Hand Surgery and Burns, University Hospital of Linköping
(2)
Department of Clinical and Experimental Medicine, Faculty of Health Sciences, Linköping University
(3)
Department of Surgical Sciences, Plastic Surgery, Uppsala University

References

  1. Peng RY, Bongard FS: Hypothermia in Trauma Patients. J Am Coll Surg 1999,188(6):685–696. 10.1016/S1072-7515(99)00035-6PubMedView ArticleGoogle Scholar
  2. Garner WL, Reiss M: Burn care in Los Angeles, California: LAC+USC experience 1994–2004. Burns 2005,31(S1):S32-S35.PubMedView ArticleGoogle Scholar
  3. Lönnecker S, Schoder V: Hypothermie bei brandverletzten Patienten-Einflüsse der präklinischen Behandlung [Hypothermia in patients with burn injuries: influence of prehospital treatment]. Chirurg 2001,72(2):164–167. 10.1007/s001040051286PubMedView ArticleGoogle Scholar
  4. Irrazabal CL, Capdevila AA, Revich L, Del Bosco CG, Luna CM, Vujacich P, Villa R, Jorge MA: Early and late complications among 15 victims exposed to indoor fire and smoke inhalation. Burns 2008,34(4):533–538. 10.1016/j.burns.2007.06.025PubMedView ArticleGoogle Scholar
  5. Fossum S, Hays J, Henson MM: A comparison study on the effects of prewarming patients in the outpatient surgery setting. Journal of PeriAnesthesia Nursing 2001,16(3):187–194. 10.1053/jpan.2001.24039PubMedView ArticleGoogle Scholar
  6. Andrzejowski J, Hoyle J, Eapen G, Turnbull D: Effect of prewarming on post-induction core temperature and the incidence of inadvertent perioperative hypothermia in patients undergoing general anaesthesia. Br J Anaesth 2008,101(5):627–631. 10.1093/bja/aen272PubMedView ArticleGoogle Scholar
  7. Butwick AJ, Lipman SS, Carvalho B: Intraoperative forced air-warming during cesarean delivery under spinal anesthesia does not prevent maternal hypothermia. Anesthesia and analgesia 2007,105(5):1413–1419. 10.1213/01.ane.0000286167.96410.27PubMedView ArticleGoogle Scholar
  8. Peng RY, Bongard FS: Hypothermia in trauma patients. Journal of the American College of Surgeons 1999,188(6):685–696. 10.1016/S1072-7515(99)00035-6PubMedView ArticleGoogle Scholar
  9. Negishi C, Hasegawa K, Mukai S, Nakagawa F, Ozaki M, Sessler DI: Resistive-heating and forced-air warming are comparably effective. Anesthesia & Analgesia 2003,96(6):1683–1687.View ArticleGoogle Scholar
  10. Turner M, Hodzovic I, Mapleson WW: Simulated clinical evaluation of four fluid warming devices. Anaesthesia 2006,61(6):571–575. 10.1111/j.1365-2044.2006.04589.xPubMedView ArticleGoogle Scholar
  11. Young VL, Watson ME: Prevention of perioperative hypothermia in plastic surgery. Aesthetic Surgery Journal 2006,26(5):551–571. 10.1016/j.asj.2006.08.009PubMedView ArticleGoogle Scholar
  12. Nesher N, Wolf T, Kushnir I, David M, Bolotin G, Sharony R, Pizov R, Uretzky G: Novel thermoregulation system for enhancing cardiac function and hemodynamics during coronary artery bypass graft surgery. The Annals of thoracic surgery 2001,72(3):S1069-S1076. 10.1016/S0003-4975(01)02943-5PubMedView ArticleGoogle Scholar
  13. Corallo JP, King B, Pizano LR, Namias N, Schulman CI: Core warming of a burn patient during excision to prevent hypothermia. Burns 2008,34(3):418–420. 10.1016/j.burns.2007.08.012PubMedView ArticleGoogle Scholar
  14. Sessler DI: Mild perioperative hypothermia. N Engl J Med 1997, 336: 1730–1737. 10.1056/NEJM199706123362407PubMedView ArticleGoogle Scholar
  15. Buggy DJ, Crossley AWA: Thermoregulation, mild perioperative hypothermia and post-anaesthetic shivering. Br J Anaesth 2000, 84: 615–628.PubMedView ArticleGoogle Scholar
  16. Melling AC, Ali B, Scott EM, Leaper DJ: Effects of preoperative warming on the incidence of wound infection after clean surgery: a randomised controlled trial. Lancet 2001,358(9285):876–880. 10.1016/S0140-6736(01)06071-8PubMedView ArticleGoogle Scholar
  17. Leslie K, Sessler DI: Perioperative hypothermia in the high-risk surgical patient. Best practice & research 2003,17(4):485–498.Google Scholar
  18. Jin F, Chung F: Minimizing perioperative adverse events in the elderly. Br J Anaesth 2001,87(4):608–624. 10.1093/bja/87.4.608PubMedView ArticleGoogle Scholar
  19. Vanni SM, Braz JR, Módolo NS, Amorim RB, Rodrigues GR Jr: Preoperative combined with intraoperative skin-surface warming avoids hypothermia caused by general anesthesia and surgery. J Clin Anesth 2003,15(2):119–125. 10.1016/S0952-8180(02)00512-3PubMedView ArticleGoogle Scholar
  20. Doufas AG: Consequences of inadvertent perioperative hypothermia. Best practice & research 2003,17(4):535–549.Google Scholar
  21. Van Peteghem S, De Jongh K, Van Doorslaer J, Hamdi M, Struys M, Reyntjens K: Comparison of oesophageal temperature characteristics obtained in patients kept warm peroperatively by the Kanmed Warmcloud body warming device and the Bair Hugger Temperature Management Unit. In Proceedings of the Residents' Meeting of the Belgian Society of Anesthesia and Reanimation; 2008. Edited by: Vercauteren M, Herregods L. Leuven; 2008.Google Scholar
  22. Janicki PK, Higgins MS, Janssen J, Johnson RF, Beattie C: Comparison of two different temperature maintenance strategies during open abdominal surgery. Anesthesiology 2001,95(4):868–874. 10.1097/00000542-200110000-00014PubMedView ArticleGoogle Scholar
  23. Kiessling AH, Isgro F, Lehmann A, Piper S, Blome M, Saggau W: Evaluating a new method for maintaining body temperature during OPCAB and robotic procedures. Med Sci Monit 2006,12(7):MT39-MT42.PubMedGoogle Scholar
  24. Vanherpen S, Cosaert P, Reyntjens K, Chafai A, Defloor T, Struys M: Evaluation of the pressure characteristics of the new Kanmed Warmcloud body warming device in healthy volunteers. Acta Anaesthesiol Belg 2007,58(1):95.Google Scholar
  25. Taguchi A, Ratnaraj J, Kabon B, Sharma N, Lenhardt R, Sessler DI, Kurz A: Effects of a circulating-water garment and forced-air warming on body heat content and core temperature. Anesthesiology 2004,100(5):1058–1064. 10.1097/00000542-200405000-00005PubMed CentralPubMedView ArticleGoogle Scholar
  26. Sury MR, Scuplak S: Water-filled garment warming of infants undergoing open abdominal or thoracic surgery. Pediatr Surg Int 2006,22(2):182–185. 10.1007/s00383-005-1618-zPubMedView ArticleGoogle Scholar

Copyright

© Kjellman et al; licensee BioMed Central Ltd. 2011

This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.